Automatic Testing System for Performance Parameters of Viscoelastic Materials

Yibing Du; Pengyu Wang; Rongting Liang; Xinju Zhou; Siyu Chen

doi:10.62051/ijcsit.v3n3.12

Authors

Yibing Du
Pengyu Wang
Rongting Liang
Xinju Zhou
Siyu Chen

DOI:

https://doi.org/10.62051/ijcsit.v3n3.12

Keywords:

Viscoelastic materials, Creep, Stress relaxation

Abstract

With the development of science and technology, viscoelastic materials such as metals and polymers are widely used in various engineering fields and structural design in China, and the creep aging forming technology and time-stressed relaxation forming technology developed by creep and stress relaxation theory has been widely used in the aviation industry. Creep and stress relaxation experiments are carried out on materials under different loading conditions, and the testing machine unit is used to realize the automatic control of the whole process of the experiment and the storage of experimental data.

Downloads

Download data is not yet available.

References

[1] CHEN Guoping, ZHU Demao. Complex-frequency method for the identification of equivalent dynamic performance parameter tests of composite materials [J]. Experimental Mechanics, 1990(03):282-288.

[2] Wang Hongcheng. Design of an indentation-based measurement system for elastic parameters of soft materials [D]. Nanjing University of Posts and Telecommunications, 2021. DOI:10.27251.

[3] Li Junfeng. Research on the measurement system of elastic parameters of damped materials [D]. Harbin Engineering University, 2005.

[4] Liu Yang, Lu Zhiwei, Ge Hong'en, et al. Study on internal pressure burst, creep, and fatigue properties of ODS-FeCrAl alloy tubes [J/OL]. Nuclear Power Engineering, 1-7[2024-07-12]. [5] LU Shaoliang, XIA Yufeng, ZHANG Wenxiang, et al. Influence of specimen size of 7050 aluminum alloy on the relaxation rate of aging stress after quenching [J/OL]. Journal of Plasticity Engineering, 2024, (06).

[5] FANG Liyuan, ZHANG Yan, LEI Qianlong, et al. Design of real-time motor status monitoring system based on STM32 [J]. Industrial Control Computer, 2024, 37(01):159-161+164.