Research on Structural Topology Optimization Methods and Application

Yuxiao Wu; Yixuan Yuan

doi:10.62051/3pnj3w88

Authors

Yuxiao Wu
Yixuan Yuan

DOI:

https://doi.org/10.62051/3pnj3w88

Keywords:

Topology optimization; Structure optimization method; Variable density method.

Abstract

Topology optimization is one of the most important methods of structure optimization, which is to optimize the weight and performance of the structure by changing the distribution of materials. Firstly, this paper introduces five main methods of topology optimization: homogenization method, variable density method, progressive structure optimization method, independent continuous mapping method and level set method. Then, the development process, optimization principle and effect of each method in practical application are elaborated. Based on the theoretical basis of these methods, the advantages and limitations of these methods in different situations and practical applications are analyzed and compared. In addition, the applicability of these methods in different scenarios is summarized, and their effects and limitations in solving specific engineering problems are pointed out. Finally, the future research direction of topology optimization and some potential improvement measures are proposed to find better solutions in complex engineering problems. The research results show that each topology optimization method has its own advantages and disadvantages. Each method is suitable for different application scenarios, so it is necessary to choose the appropriate method according to the specific needs.

Downloads

Download data is not yet available.

References

[1] K.M. Zhou, J.F. Li, X. Li, Overview of structural topology optimization research methods, Advances in Mechanics. 01 (2005) 69-76.

[2] A.G.M. Michell, The limits of economy of material in frame structure, Philosophical Magazine. 8(6) (1904) 589-597.

[3] L.A. Schmit, Structural design by systematic syntheris. Proc.2nd conf, Electronic comp. ASCE, New York .1960, pp.105 -12.

[4] S.Q. Xu, R.W. Xia, Methods of structural optimization: an overview, Acta Aeronautica ET Astronautica Sinica. 04 (1995):2-13.

[5] H.L. Cox, The Design of Structures of Least Weight. Oxford: Pergamon, 1965.

[6] M. Zhou, G.I.N. Rozvany, Camp Mech Appl Mech Engrg. 89 (1991) 309-336.

[7] M.P. Bendsoe, N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Computer Methods in Applied Mechanics and Engineering.71(2) (1988):197 -224.

[8] B. Hassani, E. Hinton, A review of homogenization and topology optimization homogenization theory for media with periodie structure, Computers and Structures.69(6) (1998):707-717.

[9] Z.J. Dai, Topology optimization of multimaterial continuum structures with displacement constraints, Beijing University of Technology, Beijing, 2019.

[10] J. Guedes, N Kikuchi, Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods, Computer Methods in Applied Mechanic and Engineering. 83(1990):143-198.

[11] B Hassani, E Hinton, A review of homogenization and topology optimization I- homogenization theory for media with periodic structure, Comput. Struct. 69(1998):707-717.

[12] B Hassani, E Hinton, A review of homogenization and topology optimization III-topology optimization using optimality criteria, Comput. Struct. 69(1998)739-756.

[13] M.P. Bendsøe, O. Sigmund, Topology Optimization, Theory, Methods and Applications, Berlin,2003.

[14] Sigmund, K. Maute, Topology optimization approaches, Structural and Multidisciplinary Optimization. 48(6) (2013):1031-1055.

[15] M.P. Bendsøe, O. Sigmund, Material interpolation schemes in topology optimization, Archive of Applied Mechanics. 69(9-10) (1999): 635-654.

[16] Y.M. Xie, G.P. Steven, A simple evolutionary procedure for structural optimization, Computers & Structures. 49(5) (1993) 885-896.

[17] D. Peng, W.F. Du, B.Q. Gao, Research and application of free topological building structure, Journal of Henan University.54(02) (2024):245-252.

[18] Querin, G.P. Steven, Y.M. Xie, Evolutionary structural optimization (ESO) using a bidirectional algorithm, Engineering Computations.15(8) (1998):1031-1048.

[19] X.D. Huang, Y.M. Xie, Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method, Finite Elements in Analysis and Design.43(14) (2007):1039-1049.

[20] Y.K. Sui, D.Q. Yang, A new method for structural topological optimization based on the concept of independent continuous variables and smooth model, Acta Mechanica Sinica.14(2) (1998): 179-185.

[21] S.Y. Shi, X.Z. Guo, K.M. Zhou, Research progress in numerical methods of structural topology optimization, Journal of Huaqiao university.45(02) (2024):150-157.

[22] R. Xong, Improvement and application of level set topology optimization method, Dalian University of Technology, Dalian, 2023.

[23] S. Osher, J.A. Sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, Journal of Computational Physics. 79(1) (1988):11-49.

[24] H.A. Eschenauer, V.V. Kobelev, Schumacher A. Bubble method for topology and shape optimization of structure, Structural Optimization.8(1) (1994): 42-51.

[25] P.D. Dunning, H.A. Kim, Introducing the sequential linear programming level-set method for topology optimization, Struct. Multidisc. Optim. 51(2015) 631–643.