Dynamic modeling and analysis of 3-RRCPR parallel pointing mechanism with clearance

Jing Sun; Jingwei Song; Yongjie Wang

doi:10.62051/nsfsc329

Authors

Jing Sun
Jingwei Song
Yongjie Wang

DOI:

https://doi.org/10.62051/nsfsc329

Keywords:

Parallel mechanism; Clearance of the revolute pair; Dynamic model; Dynamic characteristics; Pointing accuracy

Abstract

In order to study the influence of kinematic pair clearance on the dynamic characteristics and pointing accuracy of 3-RRCPR parallel pointing mechanism, the dynamic model of spatial mechanism with three-dimensional revolute pair clearance is established. Firstly, the revolute pair mode considering three-dimensional clearance is established, and the normal and tangential contact force models between the kinematic pair elements are established based on Flores contact model and modified Coulomb friction model. Secondly, the dynamic model of parallel mechanism with clearance is established according to Lagrange multiplier method. Finally, the effects of different clearance sizes and loads on the dynamic characteristics and pointing accuracy of the mechanism are analyzed by numerical simulation. The results show that the increase of clearance size and load will reduce the pointing accuracy, and the decrease of clearance size and the increase of load will enhance the motion stability of the mechanism. Reasonable clearance and load matching is conducive to improving the accuracy of the mechanism. This study provides a theoretical basis for the study of the nonlinear dynamic characteristics and accuracy of the mechanism considering the clearance.

Downloads

Download data is not yet available.

References

P. Flores, H M. Lankarani. Journal of Computational and Nonlinear Dynamics Dynamic Response of Multibody Systems with Multiple Clearance Joints[J]. 7(3): 031003. (2012)

S B. Farahan, M R. Ghazavi, S. Rahmanian. Nonlinear Dynamics, Bifurcation in A Planar Four-Bar Mechanism with Revolute Clearance Joint[J]. 87(2): 955-973. (2017)

N T. Huynh, S C. Huang, T P. Dao. Sadhana. Design Variables Optimization Effects on Acceleration and Contact Force of The Double Sliders-Crank Mechanism Having Multiple Revolute Clearance Joints by Use of The Taguchi Method Based on A Grey Relational Analysis[J]. 45(1), 1-22. (2020)

S. Erkaya. Journal of Mechanical Engineering, Effects of Joint Clearance on The Motion Accuracy of Robotic Manipulators[J], 64(2): 82-94. (2018)

F J. Cavalieri, A. Cardona. Mechanism and Machine Theory, Non-Smooth Model of A Frictionless and Dry Three-Dimensional Revolute Joint with Clearance for Multibody System Dynamics[J]. 121: 335-354. (2018)

Jian Zhang, Haidong Yu, Lin LI, et al. Machine Design & Research. Dynamic performance analysis for over-constrained mechanisms with multiple revolute clearance joints[J]. 34(1): 76-81+86. (2018)

Faxin Liu, Chuanyu Wu, Liang Sun. Transactions of the Chinese Society of Agricultural Engineering. Analysis and test of influence of revolute joint clearance on performance of crank-rocker style transplanting mechanism[J]. 32(15): 9-17. (2016)

Lixin Xu, Yonggang LI, Chongning LI, Yuhu Yang. Journal of Mechanical Engineering. Analysis of the influence of bearing clearance and flexible characteristics on mechanism dynamic error[J]. 48(07):30-36. (2012)

Z F. Bai, X. Jiang, J Y. Li, et al. Journal of Vibration and Control.Dynamic. Analysis of Mechanical System Considering Radial and Axial Clearances in 3D Revolute Clearance Joints[J]. 27(15): 1893-1909. (2020)

Xupeng Wang;Geng Liu;Shangjun Ma;Ruiting Tong . Journal of Sound and Vibration .Study on dynamic responses of planar multibody systems with dry revolute clearance joint: Numerical and experimental approaches[J]. 2019

N Song, H J Peng, X M Xu, et al. Mechanism and Machine Theory,Modeling and Simulation of A Planar Rigid Multibody System with Multiple Revolute Clearance Joints Based on Variational Inequality[J]. 154: 1-22. (2020)

S M. Varedi K, M. Daniali H, M. Farajtabar. Robotica The Effects of Joint Clearance on The Dynamics of The 3RRR Planar Parallel Manipulator[J]. 35(6): 1223-1242. (2016)

K S M. Varedi, H M. Daniali, M. Farajtabar, et al. Nonlinear Dynamics. Reducing The Undesirable Effects of Joints Clearance on The Behavior of The Planar 3-RRR Parallel Manipulators[J]. 86(2): 1007-1022. (2016)

S. Alok, K. Chaudhary, A. Guha. Sadhana. A Study on Critical Order of Joints with Clearances and Its Effect on Kinematic Performance of Multiloop Planar Mechanisms[J]. 45(1): 1-12. (2020)

Jian Wang, Hu Dong, Zhaodong Wang, et al. Journal of Vibration and Shock. Elastic dynamic modeling and analysis for a 3-CPaRR decoupled parallel mechanism with joint clearance [J]. 39(5): 118-130. (2020)

Gengxiang Wang, Hongzhao Liu. Journal of Mechanical Engineering.Dynamic analysis of 4-SPS/CU parallel mechanism considering spherical sub-clearance[J]. 51(01):43-51. (2015)

Yi Cao, Junchen Liu, Minghao Zhai, et al. Journal of Huazhong University of Science and Technology(Natural Science Edition).Dynamics analysis of 3-CPaR&R1R2 hybrid mechanism with joint clearance[J]. 47(12): 48-54. (2019)

Jingyuan Zhu, Jian Wang, Zehua Ding, Hui Zhou, Yi Cao. Vibration and shock. Kinematic and dynamic analysis of 3-CP_aRR parallel mechanism with joint space[J]. 37(18):9-17+29. (2018)

Yulei Hou, Guoning Jing, Yunjiao Deng et al. China Mechanical Engineering,Dynamics modeling and characteristics analysis of a two rotational parallel mechanism with revolute joint clearances[J]. 29(2): 158-165. (2018)

Yulei Hou, Yi Wang, Guoning Jing, et al. Journal of Vibration and Shock,Chaos and impact phenomena of a RU-RPR decoupled parallel mechanism containing clearance[J]. 36(1): 215-222+239.(2017)