Simulation of Medium Truck Frame Based on ANSYS

Chang Xu

doi:10.62051/d50ze413

Authors

Chang Xu

DOI:

https://doi.org/10.62051/d50ze413

Keywords:

Frame, Finite Element Analysis, SOLIDWORKS, ANSYS.

Abstract

The frame is the important part of the car, as the understructure of assemble. the important assembly and structure on the car are based on the frame, and fixed to corresponding position, such as, engine, transmission, steering system and cab and so on. Force situation of the frame is very complex, it supports various load from road and loading, a large proportion of vehicle performance lie on structure performance of the frame. Therefore, the frame must have adequate intensity assure its fatigue life, and adequate rigidity assure its requirement of assemble and use. The requirements of modern automobile development are not limited to traditional mechanical analysis methods. This paper takes the frame of a medium truck as the research object using the finite element analysis software ANSYS to carry on the static mechanics. In this paper, the three-dimensional model is made by SolidWorks as the carrier according to the parameters of a selected frame, and leading-in the ANSYS to carry on finite element analysis.

Downloads

Download data is not yet available.

References

[1] Wu Yinlong, structural parametric lightweight optimization design of car front subframe [D]. Jilin University, 2014.

[2] Sheng Jian, Dai Zuoqiang, Zhang Jipeng, et al. Optimization design of pure electric bus frame based on ANSYS Workbench [J]. Journal of Qingdao University, engineering technology edition, 2015.

[3] Wang J R, Chou H C, Chen D W, et al.Dynamic reacction analysis of delivery truck hitting rigid wall directly at different speed[J].Chung Cheng Ling Hsueh Pao/journal of Chung Cheng Institute of Technology,2010,39(1):13-22.

[4] Yu Zhixin, Cao Quande, Yang Shitong. Finite element analysis and size optimization of a truck frame [J]. Mechanical engineer, 2018 (01): 18-20.

[5] Dong Xiaolei, Li Dongmei. Finite element analysis of automatic delivery robot frame based on ANSYS Workbench [J]. Mechanical engineering and automation, 2019 (06): 52-53 + 56.

[6] Chen Yang. Finite element analysis of kd3900 dump truck frame based on ANSYS Workbench [J]. Equipment manufacturing technology, 2016 (09): 35-37 + 45.

[7] Hu Ruixue, Zhang Yuquan, Zhao Zhanliang, et al. Finite element analysis of side beam frame based on ANSYS Workbench [J]. Internal combustion engine and accessories, 2020 (18): 22-23.

[8] Zhi Shuya, Xu Mutian, Li Jiqiu. Finite element analysis of frame based on ANSYS [J]. Journal of Jinling University of science and technology, 2019,35 (02): 1-5.

[9] Zhou Mengmeng. Finite element simulation and optimization design of light truck frame [D]. Jiangsu University, 2020.

[10] Han Yang. Finite element analysis and optimization design of light truck frame [D]. Dalian Jiao Tong University, 2019.

[11] Liu Bingxiao. Finite element analysis of truck frame based on ANSYS Workbench [J]. Automotive practical technology, 2017 (12): 157-159.