A Review of the Basic Principles and Methods of Signal Sampling Technology

Authors

  • Jiafeng Li

DOI:

https://doi.org/10.62051/edadp344

Keywords:

Signal adoption technology; sampling theorem; sampling frequency; sampling depth; sampling method.

Abstract

In modern life, communication is an essential human activity. In the process of communication, various information spreads around the world in the form of signals. In order to optimize the communication, the reasonable processing of the signal becomes an important research problem. Signal processing is an important step during signal processing. It is one of two processes that convert an analog signal into a digital equivalent signal. It can be considered that signal sampling transforms the time axis of the signal into a set of discrete time moments, that is, the process of converting a signal in a continuous time domain to a discrete time domain through a series of methods. It is used to convert continuous time signals into digital signals for relevant processing and storage of digital signals in subsequent operations. This paper will summarize the basic principles and methods of signal sampling technology, introduce the sampling theorem, sampling frequency, sampling depth, sampling method and sampling error, and finally discuss the future development of signal adoption technology.

Downloads

Download data is not yet available.

References

[1] Huo Haiyan, Sun Wenchang "Average sampling Theorem" Chinese Science: Mathematics 9 (2015): 14031422. Print.

[2] Zhou Panpan, Fu Yingxiong, "A Sample Theorem for Non-band Signal" Journal of Hubei University (Natural Science Edition) 39.5 (2017): 542545. Print.

[3] Gai Bingshuai, Wang Jinlin, Liu Xue, "An Adaptive Sampling frequency Adjustment Method in Network Management System", Network New media Technology 1.1 (2012): 4954. Print.

[4] https://blog.csdn.net/zhuimeng_ruili/article/details/117196623

[5] Zhao Deming, Ma Xiaochuan, and Yang Li "Based on Jetson TX1 band pass sampling broadband orientation algorithm optimization" network new media technology 8.3 (2019): 2833. Print.

[6] Fan Jiaheng et al. "Anti-aliasing filter Design based on bandpass Sampling" Computer Engineering and Design 41.7 (2020): 18411845. Print.

[7] Science and Technology Innovation Guide 5 (2012): 1718. Print.

[8] Bu Xiangyuan, Fang Jinhui, Fan Xingyu, Wang Ke "Multi-rate sampling Module design based on multiphase decomposition of extraction filter" Journal of Beijing Institute of Technology 34.2 (2014): 187191. Print.

[9] Liu Yan, Zeng Fanzai, Zhou Min "Broadband Cooperative Spectrum sensing for Multiple Rate Sampling in a Cognitive Network" System Simulation Journal 25.12 (2013): 28672871. Print.

[10] Li Xiayu, Jin Huiliang, Zhong Qingchang "Design of Multi-rate Sampling Control System based on Robust Stability" Journal of Shanghai Jiao Tong University 47.12 (2013): 19021906. Print.

[11] Candès, E.J., Wakin, M.B., An Introduction To Compressive Sampling, IEEE Signal Processing Magazine, V.21, March 2008

[12] Wang Jia et al. "Real-time Integrated Defense Strategy of neural network based on Compressed perception" Computer Journal 46.1 (2023): 116. Print.

[13] Ren Bing et al. "Correlation data filling method based on compressed perception" Computer Science 50.7 (2023): 8288. Print.

[14] Pan Zemin et al. "Image reconstruction based on deep neural network" Computer Science 49.z2 (2022): 498506. Print.8288. Print.

Downloads

Published

24-10-2024

How to Cite

Li, J. (2024) “A Review of the Basic Principles and Methods of Signal Sampling Technology”, Transactions on Computer Science and Intelligent Systems Research, 8, pp. 146–152. doi:10.62051/edadp344.