Overview of Bridge Crane Control
DOI:
https://doi.org/10.62051/ijmee.v2n1.06Keywords:
Bridge Crane, Underactuated System, Nonlinear ControlAbstract
This paper summarizes the research hotspot of underactuated mechanical system in nonlinear control field, and emphasizes its wide application in practical engineering, including space vehicle, inverted pendulum and navigation system. The Chinese government has supported the construction crane industry through a series of policies and regulations, providing guidance for its safe production and technical specifications. In the context of social development, the application demand of bridge gantry cranes in narrow environments is increasing, and the future development trend will focus on the direction of intelligence, science and technology and humanization. In recent decades, the research results on the positioning and pendulum of bridge crane at home and abroad are divided into open loop and closed loop control methods, and the control methods are described in detail in this paper.
References
Research on Nonlinear Control Strategy of Underactuated Single-stage Pendulum and Two-stage Pendulum Bridge Crane [D]. Shandong University, 2018.
Yang Yonggang, Yin Yikun. Dynamic surface sliding mode Control of rotorcraft UAV with Extended Observer [J]. Control Engineering: 1-9.
Yu Zongyan, HAN Liantao, WANG Li. Design and Simulation of Linear Active Disturbance Rejection Controller for Linear Inverted Pendulum [J]. Automation & Instrumentation, 2023, 38(12): 85-90.
Zhang Zong-Xin, Yang Chun-xi, Yang Jian-Quan, et al. Trajectory tracking of unsymmetrical underactuated unmanned vehicle with unknown Interference [J]. Control Engineering, 2023, 30(12): 2185-2191.
Wang Jie, QIANG Baomin, HE Zhenxin, et al. Research on System Control Technology of Underdrive Bridge Crane [J]. Journal of Ordnance Equipment Engineering, 2019, 40(11): 116-121+159.
Sun Ning, Fang Yongchun. Review of control methods for a class of underactuated systems [J]. Journal of Intelligent Systems, 2011, 6(3): 200-207.
Chen He, Wu Qing-Xiang, Sun Ning, et al. Review of crane control methods for Large Size Cargo Transportation [J]. Journal of Intelligent Systems, 2022, 17(4): 824-838.
Singhose W. Command shaping for flexible systems: A review of the first 50 years[J]. International Journal of Precision Engineering and Manufacturing, 2009, 10(4): 153-168.
Masoud ZN, Alhazza KA. Frequency-Modulation Input Shaping Control of Double-Pendulum Overhead Cranes[J]. Journal of Dynamic Systems, Measurement, and Control, 2014, 136(2): 021005.
Singhose W, Kim D, Kenison M. Input Shaping Control of Double-Pendulum Bridge Crane Oscillations[J]. Journal of Dynamic Systems, Measurement, and Control, 2008, 130(3): 034504.
Yavuz H, Beller S. An intelligent serial connected hybrid control method for gantry cranes[J]. Mechanical Systems and Signal Processing, 2021, 146: 107011.
Zhang X, Fang Y, Sun N. Minimum-Time Trajectory Planning for Underactuated Overhead Crane Systems With State and Control Constraints[J]. IEEE Transactions on Industrial Electronics, 2014, 61(12): 6915-6925.
Fang Y, Ma B, Wang P, et al. A Motion Planning-Based Adaptive Control Method for an Underactuated Crane System[J]. IEEE Transactions on Control Systems Technology, 2011: 5711693.
Xu Lefeng, Wang Hexin. Simulation Analysis of Crane anti-swing Control System based on PID [J]. Modern Information Technology, 2023, 7(15): 45-48.
Zhang Zhenhao, Zeng Zhezhao, Wang Wei, et al. Auto-pid Anti-roll Control Strategy for Underdrive Bridge Crane [J]. Mechanical Science and Technology: 1-6.
Valluru SK, Kaur M, Kartikeya K, et al. Experimental Investigation of Fully Informed Particle Swarm Optimization tuned Multi Loop L-PID and NL-PID Controllers for Gantry Crane System[J]. Procedia Computer Science, 2020, 171: 130-138.
Bu Fanzhou, Sun Yuguo, LU Fengjiao. Fuzzy PID anti-roll control of bridge Crane based on particle swarm optimization [J]. Ship and Ocean Engineering, 2022, 38(4): 10-14.
Tysse GO, Cibicik A, Tingelstad L, et al. Lyapunov-based damping controller with nonlinear MPC control of payload position for a knuckle boom crane[J]. Automatica, 2022, 140: 110219.
Garnier H, Sibille P, Mensler M, et al. Pilot Crane Identification and Control in Presence of Friction[J]. IFAC Proceedings Volumes, 1996, 29(1): 4533-4538.
Nowacka-Leverton A, Michałek M, Pazderski D, et al. Experimental verification of SMC with moving switching lines applied to hoisting crane vertical motion control[J]. ISA Transactions, 2012, 51(6): 682-693.
Cuong HM, Dong HQ, Trieu PV, et al. Adaptive fractional-order terminal sliding mode control of rubber-tired gantry cranes with uncertainties and unknown disturbances[J]. Mechanical Systems and Signal Processing, 2021, 154: 107601.
Nguyen VT, Yang C, Du C, et al. Design and implementation of finite time sliding mode controller for fuzzy overhead crane system[J]. ISA Transactions, 2022, 124: 374-385.
Zhang M, Jing X, Zhu Z. Disturbance employment-based sliding mode control for 4-DOF tower crane systems[J]. Mechanical Systems and Signal Processing, 2021, 161: 107946.
Shen PY, Schatz J, Caverly RJ. Passivity-based adaptive trajectory control of an underactuated 3-DOF overhead crane[J]. Control Engineering Practice, 2021, 112: 104834.
Smoczek J, Szpytko J, Hyla P. The Application of an Intelligent Crane Control System[J]. IFAC Proceedings Volumes, 2012, 45(24): 280-285.
Yavuz H, Beller S. An intelligent serial connected hybrid control method for gantry cranes[J]. Mechanical Systems and Signal Processing, 2021, 146: 107011.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
