Thermal Analysis of Cutting Force and Optimization of Process Parameters for Curved Rake Face Skiving Tools

Jiawei Li; Yanan Gao

doi:10.62051/ijmee.v7n1.09

Authors

Jiawei Li
Yanan Gao

DOI:

https://doi.org/10.62051/ijmee.v7n1.09

Keywords:

Power Skiving, Cutting Force, Cutting Temperature, Finite Element Method

Abstract

Power skiving is a highly efficient and high-precision gear machining method. During the power skiving process, the cutting force and cutting temperature exerted on the tool significantly influence its service life. Improper selection of process parameters can easily lead to rapid wear and failure of the skiving tool. Currently, the characteristics of cutting forces and thermal behavior in such machining processes remain unclear, lacking theoretical guidance for tool design and process parameter optimization. To address these issues, this study designed and developed a three-dimensional model of a curved rake face skiving tool. A finite element-based simulation model of the power skiving process was established to calculate the cutting force and cutting temperature data. The influence of key process parameters on the cutting performance was analyzed. A full factorial experimental approach was adopted to optimize the power skiving process parameters based on the mean and peak values of cutting force, as well as the mean value of cutting temperature. Through comprehensive analysis, the primary factors affecting the cutting force and cutting temperature in power skiving were identified.

References

[1] V.W. Pittler, Verfahren zum Schneiden von Zahnrädern mittels eines zahnradartigen, an den Stirnflächen der Zähne mit.

[2] Schneidkanten versehenen Schneidwerkzeugs, 1910. K.D. Bouzakis, E. Lili, N. Michailidis, O. Friderikos, Manufacturing of cylindrical gears by generating cutting processes: a critical synthesis ofanalysis methods, CIRPAnn. Manuf. Technol. 57 (2008) 676–696 https://doi.org/10.1016/j.cirp.2008.09.001.

[3] E. Guo, R. Hong, X. Huang, C. Fang, Research on the design of skiving tool for machining involute gears, J. Mech. Sci. Technol. 28 (2014) 5107–5115. https://doi.org/10.1007/s12206-014-1133-z.

[4] Guo Z, Mao S M, Huyan L, et al. Research and improvement of the cutting performance of skiving tool[J]. Mechanism and Machine Theory, 2018, 120: 302-313. http://dx.doi.org/10.1016/j.mechmachtheory.2017.08.004.

[5] Hideaki O, Fuminao T, Yu H, Masatomo I, et al. Cutting Force Model for Power Skiving of Internal Gear[J], Journal of manufacturing processes, 2020, 56: 1277-1285. https://doi.org/10.1016/j.jmapro.2020.04.022.

[6] Hideaki O, Fuminao T, Yu H, Masatomo I, et al. Cutting Force Model for Power Skiving of Internal Gear[J], Journal of manufacturing processes, 2020, 56: 1277-1285. https://doi.org/10.1016/j.jmapro.2020.04.022.

[7] Pierce M, Andrew K, Luke B, Kaan E, Erdem O, Fathy I, et al. [J], Cirp Annals-manufacturing Technology, 2019, 68 (1): 109-112. https: //doi.org/10.32604/fdmp.2022.019605.