Simulation research of fire water cannon nozzle based on fluent
DOI:
https://doi.org/10.62051/ijmee.v1n1.05Keywords:
Fire water cannon, Jet performance, Structural design, Numerical simulation sprayAbstract
Fire water cannon is the main equipment in fire protection work, which is evolving towards large flow, long distance and high shooting. As an important core component of fire water monitor, the structural design of nozzle plays an important role in jet performance. The Fluent fluid simulation software was used to simulate the internal flow field of the fire nozzle model with different outlet diameters and convergence angles. The average jet velocity and turbulent kinetic energy under different parameters were compared to obtain the optimal size parameters of the fire nozzle. The results show that when the inlet diameter is 100 mm, the inlet pressure is 1.2 MPa, the length of the rectifier section is 95 mm, the outlet diameter is 50 mm, and the convergence angle is 11 °, the jet performance of the fire monitor nozzle is the best. The simulation results can provide reference for the structural design and practical application of fire water monitor nozzle.
References
WANG Peng-fei,WU Gao-gao,TIAN Chang et al.Structural Parameter Optimization of lnternal Mixing Air Atomizing Nozzle Based on Orthogonal Experiment [J/OL]. Coal Science and Technology:1-11[2022-12-28]. DOI: 10.13199/j.cnki.cst.2022-1446.
WANG Chu,YUAN Xiaoming,YANG Zhigang et al.Investigation on theoretical model of jet trajectory of fire water monitor [J].Journal of Yanshan University,2020,44(05):442-449.
Zhao Ke. Optimized design of S-type Fire Monitor body Based on CFD Technology[D]. China University of Mining and Technology, 2021.DOI: 10.27623/d.cnki.gzkyu.2021.000255.
LIU Zheng-qin. Effects of automatic fire water cannon performance parameters on the jet trajectory[J]. Fire Science and Technology, 2015, 34(11):1471-1474.
HU Guoliang LIU Shihong LI Gang XU Ming et al. Structure Design and Jet Characteristics Analysis of Fire Water Monitor[J]. Machine Tool & Hydraulics,2016,44(1):172-176,183.
YANG L, HU Z, GENG L. Numerical Investigation of the Influence of Nozzle Geometrical Parameters on Thrust of Synthetic Jet Underwater[J]. Sensors & Actuators A Physical, 2018, 269: 111-125.
ZHANG Lijie, WANG Chu, ZOU Yida et al.Numerical Simulation of Flow Field of the Fire Water Monitor' s Nozzle[J]. Machine Tool & Hydraulics, 2019, 47(22):5.
Ma Dezhuang. DESIGN AND RESEARCH ON WATER GUN MECHANISM OF FIRE FIGHTING ROBOT[D].ShangHai: Donghua University,2022.
URBÁN A, ZAREMBa M, MALÝ M, et al. Droplet dynamics and size characterization of high-velocity airblast atomization. International Journal of Multiphase Flow 2017; 95: 1-11.
Jia Chuandi. Structural Design and Performance Study of the Three-phase Jet Fire Monitor[D]. China University of Mining and Technology,2019.
Haoran Song. Structural Optimization and Experimental Study of Internal Mixing Air Atomizing Nozzle[D]. AnHui University of Science and Technology,2022. DOI: 10.26918/d.cnki.ghngc. 2022.000116.
Tong Pirong. A Numerical Investigation for the Flow Field of the DC Fire Monitor Nozzle with Different Contraction Curves[D]. Chongqing University,2017.
Fang Fei,Liu Pingan.Development Design and Test of Fire Monitor with Straight Flow Channel[J].Journal of East China Jiao tong University,2022,39(06):84-89.DOI:10.16749/j.cnki.jecjtu.20221104.006.
Emergency Management Department. Fire Cannon. GB 19156-2019 [S] two thousand and nineteen
Liu Shihong. STRUCTURE DESIGN AND JET PERFORMANCE STUDY OF FIRE WATER MIST MONITOR WITH LOW PRESSURE AND LONG RANGE[D]. East China Jiaotong University,2016.
State Administration for Market Regulation and China National Standardization Administration Definition and selection of nominal dimensions for pipeline components: GB/T 1047-2019 [S] two thousand and nineteen
Yang Guolai,Zhou Wenhui,Liu Fei.Simulation of flow field of high-pressure water-jet from nozzle with FLUENT[J].Journal of Lanzhou University of Technology, 2008, 34(2): 49—52.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.







