Research Progress of Safety Assessment Technology of Pressure Vessel Pipeline with Defects

Wan Wu; Ying Zhang; Guohong Huang; Hao Zhang

doi:10.62051/ijmee.v5n2.11

Authors

Wan Wu
Ying Zhang
Guohong Huang
Hao Zhang

DOI:

https://doi.org/10.62051/ijmee.v5n2.11

Keywords:

Pressure Pipe, Service Life, Defect Assessment, Extended Service

Abstract

Pressure vessel is widely used in the energy industry, military industry, scientific research and many other fields, the importance of its safe operation is self-evident, the safety of pressure vessel and pipeline has been an important research topic. For the safety assessment of defective vessels and pipelines, this paper firstly introduces the research results of the latest standards of defective equipment and pipelines, gives the latest progress of defect assessment theory, briefly reviews the application status of safety assessment of defective vessels, and finally proposes the current situation of domestic defect assessment, providing a basis for the safety evaluation of defective vessels and pipelines.

References

[1] Notice on the National Special Equipment Safety Status in 2021 by the State Administration for Market Regulation [J].Western Special Equipment, 2022, 5(03): 5-11.

[2] Huang Weihe, Mei Yingdan, Wu Lili, et al. Analysis of Energy Revolution and China's Energy Economic Security [J].Strategic Study of CAE, 2021, 23(1): 124-132.

[3] Huang Weihe, Shen Xin, Hao Yingpeng. Development Prospects of China's Oil and Gas Pipeline Network and Energy Internet [J].Journal of Beijing Institute of Technology (Social Sciences Edition), 2019, 21(1): 1-6.

[4] Yan Dafan. Review and Reflection on 70 Years of Higher Education in Oil and Gas Storage and Transportation [J].Oil & Gas Storage and Transportation, 2022, 41(6): 601-606.

[5] Fang Jianping. Case Analysis of Domestic and International Oil and Gas Pipeline Accidents [J].Petro & Chemical Equipment, 2016, 19(09): 90-93.

[6] Chen Jiang, Lou Yiqing, Bao Shiyi, et al. Research on the Knowledge System of Expert Systems for Safety Assessment of Defects in In-Service Pressure Pipelines [J].Journal of Zhejiang University of Technology, 2000, (01): 4-13.

[7] Qu Wenqing, Zhang Peng, Zhang Yanhua. Research on Computer-Aided Fracture Assessment Systems for Pipelines [J].Oil & Gas Storage and Transportation, 2003, (04): 16-21+60-62.

[8] Yu Jin. Overall Design of Defect Database and Assessment Decision Support System for In-Service Pressure Vessels [D]. Sichuan University, 2006.

[9] Cai Zhuyu. Expert System for Safety Assessment of Pressure Vessels with Defects [D]. Tianjin: Tianjin University, 2006.

[10] Wang Yaxin, Xie Yujun. Safety Assessment of Defective Pressure Pipelines Based on GB/T 19624-2004 [J].Journal of Petrochemical Universities, 2007, (02): 54-57.

[11] Wei Xian. Decision Support System for Safety Assessment of In-Service Pressure Vessels with Defects [D]. University of Electronic Science and Technology of China, 2008.

[12] Chen Yonghui. Research on Defect Management and Safety Assessment Software System for Pressure Vessels [D]. University of Electronic Science and Technology of China, 2010.

[13] Ma Yehua, He Dongsheng, Chen Xingming, et al. Safety Assessment System for Defective Pipelines Based on VC, ANSYS, and Access [J].Pipeline Technology and Equipment, 2010, (01): 21-24.

[14] Wen Tuo. Safety Assessment of Engineering Defective Pipelines Based on VB [D]. Dalian University of Technology, 2012.

[15] Yan Huailei, Jin Zhijiang, Jiang Chenghang. Development of Safety Assessment System for Pressure Pipelines with Incomplete Penetration Defects Based on Qt and ANSYS [J].Chemical Engineering & Machinery, 2013, 40(01): 38-42+45.

[16] Luo Chang. Development and Application of Safety Assessment System for Defects in In-Service Natural Gas Pipelines [D]. Southwest Petroleum University, 2015.

[17] Lu Zexing. Development of Defect Assessment Software for Pressure Vessels [D]. Northwest University, 2015.

[18] Yang Yuqing, Hui Hu. Development and Application of Fitness-for-Service Assessment Software for Industrial Pipelines [J].Chemical Equipment Technology, 2020, 41(04): 5-9.

[19] Guo Jinlian, Li Qi, Tang Hui, et al. Fracture Mechanics Assessment of Q345R Cylinders with Axial Through-Wall Cracks [J]. Chemical Equipment and Piping, 2020, 57(04): 18-20.