Research Status of Wear Prediction of Spherical Friction Pair
DOI:
https://doi.org/10.62051/ijmee.v2n2.06Keywords:
Spherical Friction Pair, Wear Amount, Influence FactorAbstract
Spherical friction pairs are widely used in mechanical equipment, and predicting the wear of spherical friction pairs can help evaluate and predict bearing life. At present, when using the finite element analysis method to calculate the wear of spherical friction pairs, it is still necessary to simulate under idealized conditions, and the limitations of calculation amount and time need to be considered. The accuracy of the prediction method is measured by experimental means to measure the wear amount, which can be characterized by measuring the mass, volume, or wear thickness of the material under grinding. Based on the wear test methods used and the characteristics of the tested materials, suitable wear characterization parameters and measurement methods can be selected. This article also analyzes the influence of friction pair materials and service conditions on the wear of spherical friction pairs. Finally, the article looks forward to the development trend of predicting the wear of spherical friction pairs.
References
DAI Yujing. Tribological Design of Metal Spherical Plain Bearing [D].Zhejiang University,2021.
Liu Weimin. Handbook of Space Lubrication Materials and Technologies, Science Press, 2009.
BAI Yaoxing, QIU Ming, LI Yingchun, et al. Study Status and Development of the Wear Failure of Spherical Plain Bearing [J]. Modern Manufacturing Engineering,2012(04):138-142.
LIU Yunfan, QIN Hongling, HAN Cuihong, et al. Research Status of Life Test and Damage Failure Mechanism of Self-Lubricating Spherical Plain Bearings [J].Materials Reports,2021,35(01):1036-1045.
ZHOU Zhansheng. Wear Mechanism and Life Analysis of Self-lubricating Spherical Plain Bearing under Sinusoidal Load[D].Henan University of Science and Technology,2019.
ZHOU Zhong-rong. Frontiers of Tribology Development [M]. Beijing: Science Press, 2006: 236-245.
ZHU Xiaotong,PAN Jinzhi,ZHAO Xiujuan,et al. Efffect of Contact Stress on the Evolution and Propertiesof FCB Wheel Steel [J].Journal of Tribology, 2021, 41 (5): 749-757.
WANG Wenjian, GUO Jun, LIU Qiyue. Effect of Contact Stress on Rolling Friction and Wear Behavior of Wheelrail Materials [J]. Journal of Tribology,2011,31(4):352-356.
GU Yanguang. Analysis of Subsurface Stress Influence Characteristics of Microstructure Unfolding Wheel and Parameter Optimization Design [D]. Harbin University of Science and Technology,2023.
WEI Aobo, MA Guozheng, LI Guolu, et al. Status and Prospect of Research Methods on Wear Life of Self-Lubricating Spherical Plain Bearing [J]. Surface Technology,2023.
LI Congbo, HE Jiao, DU Yanbin, et al. Archard Model Based Machine Tool Wear Model andFinite Element Analysis [J]. Journal of Mechanical Engineering, 2016, 52 (15): 106-113.
LUO Lin-hui, WANG Xiu-mei, LIU Hong-yu, et al. Number Simulation Analysis of Self-Lubricating Joint Bearing Liner Wear[J]. International Journal on Interactive Design and Manufacturing (IJIDeM), 2019, 13(1): 23-34.
LU Jian-jun. Study on Failure Mechanisms and Life Estimation Methods of Self-Lubricating Radial Spherical Plain Bearings[D]. Xi'an: Northwestern Polytechnical University, 2017: 10-12.
Dhananjay Bhatt. Hybrid Spherical Bearing: USA, US0031559A1[P].2008.
YU Chuan-yong, JU Peng-fei, WAN Hong-qi, et al. Tribological Properties of the Polyacrylate/PTFE Coating Modified by POSS in the Space Environment[J]. Journal of Applied Polymer Science, 2020, 137(21): 48730.
LI Yingchun, QIU Ming, MIAO Yanwei, et al. Study on tribological properties of spraying MoS2 /graphite composite coatings of spherical plain bearing [J].Modern Manufacturing Engineering,2015(06):22-26.
QIU Ming, LU Jian-jun, LI Ying-chun, et al. Investigation on MoS2 and Graphite Coatings and Their Effects on the Tribological Properties of the Radial Spherical Plain Bea-rings[J]. Chinese Journal of Mechanical Engineering, 2016, 29(4): 844-852.
TalatTevrüz. Tribological Behaviors of Bronze-filled Po-lytetrafluoroethylene Dry Journal Bearings [J]. Wear, 1999, 230 (1): 61-69.
Qiu M, Gao Z L, Yao S J, et al. Manufacturing Au-tomation Technology Development,2011,455,406.
LI Xijun, QIU Ming. Comparison of Tribological Properties of Different Liners for Spherical Plain Bearings [J]. Bearings, 2010(5):34-36.
WEI Libao, NIU Rongjun. Analysis on Stress Filed of Radial Spherical PlainBearings under Tilting Condition [J]. Bearing,2010(6):19-21.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
